To assemble the Batman Gotham City Guardian Playset, please follow these steps:
- Refer to the instruction sheet to place all the stickers of the playset.
- Use a screwdriver to remove the battery door and insert 3 AAA batteries and replace the battery door.
- Press and hold the yellow button on at the base of the Bat Tank to rotate the sides of the tank from the front to the back.
- Flip the front and back supports down on both legs until they click into place to secure the feet. Ensure that all 4 yellow foot locks are fully extended on each foot before placing the base on a flat surface in a standing position.
- Remove the Bat Pod from the back of the Batwing.
- Rotate the arms to extend the gauntlets and then rotate the arms down.
- On top of the Batwing, press the yellow button to flip the cockpit of the Batwing into place.
- Hold the torso of the Gotham City Guardian upright and line it up with the base. Lower the upper half onto the base until it clicks into place.
- Flip the chest canopy down and place the 4-inch Batman figure inside. Line up the peg to the hole on the back of the figure’s back to secure the figure in place. Flip the canopy door closed.
You’ve successfully assembled your Gotham City Guardian Playset!