Monster Jam ThunderROARus Drop Playset How-To Video

Learn how to assemble and play with your ThunderROARus Drop Playset! Speed down the track, hit the ramp, and launch out of the dino head!

How do I assemble the mounting piece on the wall?

To assemble the mounting piece, you’ll need low-adhesive tape.Place the cardboard ramp up flat against the wall you wish to apply the mounti...

How do I attach the playset to the mounting piece?

When attaching the playset to the mounting piece, please ensure that you push down and completely secure all 8 connection points.

How do I store my ThunderROARus Drop Playset?

To store the ThunderROARus Drop Playset:Remove the top jaw of the dinosaur from the playset.Detach the red tracks pieces.Detach the pulley s...

How to I prepare the wall for my ThunderROARus Drop Playset?

To prepare the wall for your ThunderROARus Drop Playset, please make sure that all surfaces are clean and dry. Use rubbing alcohol for clean...

How do I remove the mounting piece from the wall?

To remove the command strips from the wall, please follow these steps: Grab removal tab. To prevent the base snapping your fingers, hol...

Where can I get more command strips?

Extra command strips are sold separately, subject to availability. The ones used for this playset are the “Large Command Strips”.

What type of batteries are required?

The type of batteries that are required for the ThunderROARus Drop Playset are 2 AAA batteries.

How do I turn on my ThunderROARus Drop Playset?

On the dinosaur’s head, there is a power switch. Select between Mute Mode (Lights Only) / Off / On (Lights & Sounds).

How do I activate mute mode?

To activate mute mode, select the left option on the power switch. The playset will operate with lights only and no sounds.

What are the different stunts my truck can perform on my ThunderROARus Drop Playset?

There are 3 different stunts your truck can perform on your ThunderROARus Drop Playset: High JumpFront FlipBarrel Roll

How do I switch between the different stunts?

To switch between the 3 different stunts, use the yellow dial to rotate the ramps until you reach the desired stunt ramp. The ramp you ...

How do I launch my truck?

To launch the truck, first you load it on the pulley. Use the hand crank to wind up and pull the vehicle backwards. Once it reaches the...

How do I adjust the height of the loading dock?

To adjust the height, lift up the yellow lock to slide the loading dock up or down. Adjust to your desired height. Close the yellow loc...

What is the cardboard ramp used for?

Place the cardboard ramp in front of playset to use it as a landing area for your truck.Bonus: Try to aim at the points on the ramp and be t...

What do I do if the playset will not release the vehicle for launch?

Please ensure that the vehicle is being cranked all the way to the end of the pulley. Once the truck reaches the end, it will release t...

What do I do if the command strips/playset piece will not stick to the wall?

Ensure that all the guidelines and instructions about the wall preparation are completed first. Note: Please make sure that after you p...

What if there are no lights and sounds on my ThunderROARus Drop?

Check the battery compartment if there are batteries inside. The playset requires 2 AAA batteries.

Why aren’t there sounds on my playset?

Check the power switch to make sure that the playset isn’t in Mute Mode. If it is, select the right option on the power switch to activ...