To assemble the mounting piece, you’ll need low-adhesive tape.
- Place the cardboard ramp up flat against the wall you wish to apply the mounting piece to and use the low-adhesive tape on the top corners of the ramp and near the bottom of the ramp to hold it in place.
- Connect the two mounting pieces together until they snap into place.
- On the command strip, peel the RED side and stick the red side onto the mounting bracket so that the BLACK side is facing up. You’ll need 5 command strips for the mounting piece.
- Press each strip firmly for 30 seconds.
- Peel off the black side of the command strip.
- Place the mounting piece in the allocated slot where the cardboard ramp is.
- Press the command strip icons firmly for 30 seconds.
- Remove the cardboard ramp from the wall.
- Please wait 1 HOUR before attaching the rest of the playset pieces.