Troubleshooting
-
What if my BOXER does not turn on?
The battery is probably not charged. Plug in to the included Micro-USB charging cable. Cable is for charging only. BOXER will only charge wh...
-
What if my Robot does not charge?
Make sure you are using the included micro USB charging cable and that your USB outlet has power. If you have lost the included cable, try u...
-
What if my Robot does not turn on while it is charging?
For safety reasons, the robot cannot be turned on while it is charging.
-
What if my Robot does not respond to my controller?
Make sure your remote controller is pointing at the robot and the robot is in Remote Control Mode. Make sure fingers are not blocking the IR...
-
What if my Robot does not react to my phone?
Make sure your robot is in App mode and that the volume on your phone is turned all the way up so BOXER can hear it. Make sure the toy is pl...
-
What if my Robot is not moving?
If your robot is not responding to your gestures, the robot may recognize the remote control is still on. Wait for controller to go to sleep...
-
What if my robot does not perform a wheelie?
Try sneaking up on him from behind! Place your hand right behind Boxer. If Boxer isn’t balancing, try putting it on a different surface. S...
-
What if my robot does not follow the line on the scan card?
Before line following your robot must first calibrate on the white paper your track is on. Calibration takes just a couple seconds, once thi...
-
What if my Boxer is on and his eyes are moving but he’s not moving?
Make sure the toy is not receiving a signal from the IR remote. Check to see if the red LED light on the remote is on and if it is remove th...
-
How do I turn off my remote control?
There is no off switch on your remote control. Simply wait for controller to go to sleep after 20 seconds or remove controller away from env...
-
What if Boxer does not follow the line on the scan card in Go Kart Game Mode?
Before line following, Boxer must first calibrate on the white paper your track is on. Calibration takes just a couple seconds, once this st...