Zero Gravity™ Laser Instructions

Click here to download Zero Gravity™ Laser Instructions

How do I turn my Zero Gravity™ Laser ON/OFF?

The power switch is located on the back of the vehicle on the left side. Push the power switch to the right for the OFF (O) position. Push t...

How do I charge my Zero Gravity™ Laser?

Move the power switch on the vehicle to the OFF (O) position. Plug the USB end of the charge cable into a computer. Plug the other end into ...

How do I switch my Zero Gravity™ Laser from Ground Mode to Wall/Ceiling Mode?

To drive on walls or upside down, you must have the power switch on the Wall/Ceiling Mode. Listen for the fan to turn on before placing on t...

What if my Zero Gravity™ Laser is not driving correctly?

If your Zero Gravity™ Laser is not driving correctly, try the following tips:Adjust the skirt on the under body to ensure that it is at a 45...

What if my Zero Gravity™ Laser has a flashing or blinking light?

LED lights on vehicle will flash or blink when battery is low on power. Vehicle should be removed from surface and recharged. When battery i...

Can I race two or more Zero Gravity™ Lasers?

Any Zero Gravity™ Laser controller can control a Zero Gravity™ Laser vehicle (red or blue) as long as the ‘laser’ is within 33 cm (1 foot) o...

What if the fan of my Zero Gravity™ Laser does not turn on?

If the fan does not turn on when the Zero Gravity™ Laser’s power switch is in the Wall/Ceiling Mode, turn the vehicle off and check for debr...

Does my Zero Gravity™ Laser use a real laser?

The Zero Gravity™ uses a LED light that is visible on the surface only. It does not use any real lasers.

What is the charge time and play time of the Zero Gravity™ Laser?

Approximately Full Charge Time: 45 minutes Approximate Drive Time: 5-10 minutes