If your Zero Gravity™ Laser is not driving correctly, try the following tips:
  • Adjust the skirt on the under body to ensure that it is at a 45-degree angle.
  • Stand within 2 metres (6 feet) of the wall and make sure to point the laser beam within 33 cm (1 foot) radius of the vehicle.
  • Only drive on smooth, clean, dry and opaque (nontransparent) surfaces. Do not drive off the corner or off the edge of the wall or uneven, porous, or broken surfaces, as vehicle will not adhere and can fall off.
  • Make sure surfaces are clear of obstacles, including hanging pictures, light switches, etc. Any cracks, bumps, or openings will cause loss of suction and may cause vehicle to fall off of the wall.
  • Make sure to point the laser beam within 33 cm (1 foot) radius of the vehicle. Car LED will change from WHITE to RED when laser is visible to the car.
  • Do not continue to drive when LED begins to blink or flash. Vehicle should be removed from surface and recharged.