Drone Mode
- Turn the controller on. Power light will light up.
- Turn the vehicle on using the ON switch on the side of the vehicle and place on a flat surface.
- Lights on the vehicle will flash as it connects to the controller. Lights turn solid when connected.
- Push the throttle level up to the maximum position (1) and back to minimum position (2) to complete the connection. The controller LED will turn SOLID when pairing is complete.
- You are now ready to fly.
- Increase the throttle to lift off
Race Car Mode
- Turn the controller on. Power light will light up.
- Turn the vehicle on using the ON switch on the side of the vehicle and place on a flat surface.
- Lights on the vehicle will flash as it connects to the controller. Lights turn solid when connected.
- Push the throttle level up to the maximum position (1)
and back to minimum position (2) to complete the connection.
The controller LED will turn SOLID when pairing is complete. - You are now ready to play.
- Increase the throttle to drive.
If you're still having issues, make sure your vehicle is fully charged and both vehicle and controller are OFF before pairing. Wait a few seconds and place the vehicle on a stable surface and turn ON.
For most Air Hogs, the Power Button on the controller, or the lights on the vehicle will blink. Lights will turn solid once the connection is made.
For most Air Hogs, the Power Button on the controller, or the lights on the vehicle will blink. Lights will turn solid once the connection is made.