Stunt Board Mode:
- Ensure switch is in Stunt Board mode on controller. Turn the controller on. Power LED will lightup.
- Turn the vehicle on using the ON switch on the side of the vehicle and place on a flat surface. DO NOT TAKE OFF FROM YOUR HAND AND DO NOT TRY TO CATCH *ALWAYS PUT ON FLAT SURFACE*
- Lights on the vehicle will flash as it connects to the controller. Lights turn solid when connected.
- The LED indicator on the controller will light up solid when pairing is complete.
- You are now ready to fly. Increase the throttle to lift off or press the auto take-off/land button. WARNING: ALWAYS LAND AND ENSURE ROTORS ARE NOT SPINNING/MOVING BEFORE GRABBING/PICKING UP PRODUCT
PARAGLIDER MODE
- Ensure switch is in Paraglider mode on controller. Turn the controller on. Power LED will light up.
- Turn the vehicle on using the ON switch on the side of the vehicle and place on a flat surface. DO NOT TAKE OFF FROM YOUR HAND AND DO NOT TRY TO CATCH *ALWAYS PUT ON FLAT SURFACE*
- Lights on the vehicle will flash as it connects to the controller. Lights turn solid when connected.
- The LED indicator on the controller will light up solid when pairing is complete.
- You are now ready to fly. Increase the throttle to lift off or press the auto take-off/land button. WARNING: ALWAYS LAND AND ENSURE ROTORS ARE NOT SPINNING/MOVING BEFORE GRABBING/PICKING UP PRODUCT
If you're still having issues, make sure your vehicle is fully charged and both vehicle and controller are OFF before pairing. Wait a few seconds and place the vehicle on a stable surface and turn ON. For most Air Hogs, the Power Button on the controller, or the lights on the vehicle will blink. Lights will turn solid once the connection is made.