1) When connecting the board to the paraglider, line up the board’s fastening pegs with the fasten points in either end of the paraglider. Slide the board up to lock the pegs into the fasten points.

ENSURE THAT THE HARNESS AND RIDER ARE FACING IN THE SAME DIRECTION AS THE FORWARD ARROW ON THE BOARD.

2) When connecting the harness to the paraglider, make sure to line up the harness’ fastening pegs with the fasten points in either end of the paraglider.

3) Slide the harness down to lock the pegs into the fasten points.

4) Insert the hand held pegs into the rider’s hand grooves and the back peg into the riders back.

5) Pull the rider’s arms down to tighten the paraglider ropes. Ensure all holds are secure before flying.

NOTE: Always fasten and remove the rider gently when connecting or disconnecting the rider from the board.