To use the hydro prints on your fabric, please follow these steps:
  1. Choose your Hydro Prints to decorate your project. Peel Hydro Print off the back of the sheet. Hydro Prints may be cut to size after being peeled from the sheet.
  2. Wet your Stamper and lightly squeeze out excess water. Stamper should still be wet.
  3. Stamp fabric to dampen area.
  4. Place Hydro Print on dampened fabric.
  5. Dab Hydro Print with wet Stamper until it is applied onto the fabric. Tip: you can layer Hydro Prints on top of each other.
  6. Important: Do not touch Hydro Prints while still wet or else they will come off.
  7. Leave to dry for 2 hours. Tip: To remove Hydro Prints, just wash off once dry.
Important: Please dry stamper thoroughly before storing.