To use the hydro prints on your fabric, please follow these steps:
- Choose your Hydro Prints to decorate your project. Peel Hydro Print off the back of the sheet. Hydro Prints may be cut to size after being peeled from the sheet.
- Wet your Stamper and lightly squeeze out excess water. Stamper should still be wet.
- Stamp fabric to dampen area.
- Place Hydro Print on dampened fabric.
- Dab Hydro Print with wet Stamper until it is applied onto the fabric. Tip: you can layer Hydro Prints on top of each other.
- Important: Do not touch Hydro Prints while still wet or else they will come off.
- Leave to dry for 2 hours. Tip: To remove Hydro Prints, just wash off once dry.
Important: Please dry stamper thoroughly before storing.