If your Sewing Machine will not sew out of the box, please try the following troubleshooting steps:
  • Please ensure that the batteries are installed correctly.
  • Make sure the machine is on and the Pause button is switched to Play.
  • Make sure the needle is threaded. If it is unthreaded, use the threader tool to rethread it.
    • The thread should be 6 cm/2.5 inches long before sewing.
  • If your machine will not sew or stops sewing, ensure that the fabric is right up to the seam guide. This makes sure that it is covering the fabric sensor.
    • If the fabric does not cover the sensor, the machine will not sew.
  • The machine automatically turns off after 10 mins being not in use. Turn the machine OFF and then back ON to wake it up.