How do I activate lights and sounds on my Barkyard Playset?

Lights and sounds are activated by pressing on the red spotlight button at the front of the tower.

How do I load the mold trays?

Mold trays must be slid into the slot located at the bottom of the impactor. Please ensure that the mold is pushed all the way in and c...

How does the impactor work?

After a mold is loaded into the impactor, Kinetic Build-It compound should be loaded onto the loading platform. The press downwards on ...

Where is the power switch?

There is no power switch. The playset will automatically power down after 30 seconds being not in use. Rubble will bark and the light w...

How do I connect the hook/claw attachments?

The hook/claw connects to the blue connector point at the end of the string attached to the crane. The attachments should pop on and of...

How does the claw work?

The claw opens and closes with a sliding switch. It can also be opened manually with the silver prongs.

What is the blue container used for?

The blue container measures the optimal amount of Kinetic Build-It to play with the impactor.

How does the string on the crane retract/extend?

The string retracts by pulling the blue attachment piece inwards towards the playset.The string extends by pulling the blue attachment piece...

Do Paw Patrol characters fit in the vehicle?

Yes, all core figures except for Zuma and Rex can fit into each vehicle.

What do I do if there are no lights and/or sounds on my Barkyard Playset?

Please ensure that fresh batteries are inserted into the battery compartment. This product needs 3 AAA batteries.

The impactor is blocking the cage from opening on the loading platform.

The impactor should automatically retract to its original position with enough space for the cage to pop off. If it does not retra...

What do I do if the crane on my Barkyard Playset will not articulate/rotate?

Please ensure that there is enough space around the Barkyard Playset to rotate the crane.

What can I do if my Kinetic Build-It is too hard to mold?

To soften the Kinetic Build-It compound, play with it in your hands to warm it up and make the compound more malleable.

The molds are loose and moving when I use the impactor.

Please ensure that the molds are being inserted all the way in and you hear a click to indicate it is tightly in place.